Assign A Serial Number; Assign An Id Number - Pioneer KURO KRP-600M Mode D'emploi

Use Other Equipment With Your Flat Panel Display
Sample MS-DOS search screen using "nslookup"
C:\> nslookup
Server:
Adress:
> mailsv.aaa.com
Server:
Adress:
Non-aurthoritative answer:
Name:
Adress:

6.9 Assign a Serial Number

6.9.1

Assign an ID Number

This section describes how to enter the required ID number for controlling and adjusting multiple panels through
a single PC. To assign the ID Number, follow the directions below.
Serial Setting
1 ) Access
2 ) Select ID No. Set
All 00H-FFH
3 ) Select or
Parameter
00H-FFH
All
Note: This setting applies to all input sources.
xxx.xxx.xxx.com
yyy.yyy.yyy.yyy
xxx.xxx.xxx.com
yyy.yyy.yyy.yyy
mailsv.aaa.com
zzz.zzz.zzz.zzz
through the Control Setup
from the Serial Setting menu.
Control Setup
IP Control Setting
IP Control
DHCP
IP Address
Subnet Mask
Default Gateway
MAC Address
LED
KURO LINK Setting
Input Setting
Power Off Control
Power On Ready
Hold Sound Status
Power On Test
Power Off Test
Serial Setting
ID No.Set
Baud Rate
Exit
from the submenu.
ID No.Set
sets an ID Number
does not set an ID Number
Current name server
Mail server searched for
Current name server
Server: IP Address for mailsv.aaa.com
menu .
: Disable
: On
: On
: Off
: Off
: Off
: Off
: All
: 9600bps
All
Description
06
73
En