BFT MOOVI 30 - ALPHA BOM Instructions D'utilisation Et D'installation page 18

INSTALLATION MANUAL
;;
8'
;;
o
;::
;!
:xi
o
17.2) TABLE A: DIP SWITCH
Cross out
DIP Default Definition setting Description
used
TCA- Automatic
ON
Automatic closing ON.
DIP 1 ON
closing time.
OFF Automatic closing OFF.
ON Photocells active during closing only.
DIP 2 ON
FCH- Photocells.
OFF Photocells active during closing and opening.
ON STARTcommands not accepted during opening.
DIP 3 OFF BLI - Block Pulses.
OFF STARTcommands accepted during opening.
3P/4P - 3 steps or 4
ON Switches to 3-step logic.
DIP 4 OFF
steps.
OFF Switches to 4-step logic.
ON
Activates built-in receiver in fixed-code mode.
DIP 5
OFF CODE FIX - Fixed code.
OFF Activates built-in receiver in rolling-code mode.
RADIO LEARN -
ON Enables wireless memorizing of transmitters (Sect. "Remote Programming").
DIP 6
OFF
Transmitter program-
Disables wireless memorizing of transmitters. Transmitters are memorized only by means of
mingo
OFF
manual programming.
SCA- Gate open light
ON
Activates relay output as 2nd radio channel.
DIP 7 OFF
or 2nd radio channel.
OFF Activates relay output in Gate open light mode.
ON
Closes barrier after the photocells are cleared before waiting for the setTCA to elapse.
DIP 8 OFF FAST CLOSE
OFF Command not enabled.
1 8 -
MOOV130-50 - ALPHA 80M