Charging The Battery; Starting The Device - SPORT-ELEC multisportpro Manuel D'utilisation

I. ChARGING ThE BATTERy
the device contains a rechargeable battery, immediately following purchase, simply charge it for 4 hours by plugging the unit into
the mains power supply.
It is not possible to use the device whilst the battery is charging.
If the device remains unused, charge the battery for 4 hours (maximum) every 4 months.
the device switches itself to stand-by mode if the battery needs charging, this is to prevent the battery to be unloaded.
TO CHARGE THE UNIT (see diagrams 1, 2, 3 page 3)
Disconnect the 4 modules cables from the unit.
f f
Close the locking system by pushing the button to the right (4 USB locked, jack DC In open)
f f
Connect the charger supplied with the unit.
f f
IMPORTANT! Before charging batteries, make sure that the locking system is properly closed.
DISPLAY DURING THE BATTERY CHARGE
While charging the battery, the indicator battery displays
f f
Unplug the AC adapter in order to block out the energy supply when the battery is fully charged.
f f
When unplugging the AC adapter, the screen switches off.
f f
When the battery indicator is empty
f f
II. STARTING ThE DEVICE
DISPLAY – POWERING THE DEVICE ON
1
Beware to starting the device, press briefly maximum 1 second the
switch on of the unit before pressing another key.
All pictograms display and shut off, then all front muscles blink.
If you press permanently, the screen will blink and display all the available programs.
Press the key for switching the device off.
Or for returning to the previous menu, press the
SELECTING THE MUSCLE ZONE(S) TO STIMULATE
2
Choosing the 1 zone
st
f f
the screen displays , meaning you can choose a first muscle zone.
to choose the front muscles, validate with the
to choose the back muscles, press the key: the 1
to return to the front muscles, press the key.
Press the key to move upwards and scroll the different muscle zones.
to go back, press the key.
After selecting the muscle group, validate using the
Choosing the 2 zone
nd
f f
All pictograms blink and the screen displays
to choose a 2 muscle zone, validate again either the front muscles or the back muscles, validate
nd
Choose again another muscle zone, then validate
Recommendations
the pictograms for upper muscles and for lower muscles are different. Avoid selecting upper muscles and lower muscles, as the
unit would give priority to upper muscles, reducing somewhat the yield of work on lower muscles.
SELECTING THE PROGRAM
3
Programs on the left (SPOrt programs) blink.
If you choose the SPOrt programs
to choose the HEALtH programs
Scroll through the programs by pressing the key:
the screen first displays the 1
to go back, press the key.
You have now chosen the muscle zone(s) to be stimulated and the program.
,
, it means that the battery is discharged.
key or press briefly the
key: the 1
muscle zone at the bottom blinks: gastrocnemius (calves)
st
key
. the screen proposes to choose a 2
key.
, validate .
, press the key and validate
lower pictogram while displaying the corresponding program number at the top.
st
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . >
, then to show that the battery is charging.
red key in order to switch the device on. Wait a complete
key twice.
muscle zone at the bottom blinks: quadriceps.
st
muscle zone:
nd
.
.
15