Description Of The Unit; Description Of The Screen - SPORT-ELEC BODY BEAUTYFUL BB2M Mode D'emploi

DESCRIPTION OF THE UNIT

1.
« » ON/OFF key / Emergency stop.
2.
P
« » Key Programs.
3.
Buttons to adjust the power of A channel :
: to increase the power(from 0 to 72).
: to decrease the power (from 72 to 0).
4.
Buttons to adjust the power of B channel :
: to increase the power (from 0 to 72).
: to decrease the power (from 72 to 0).
5.
Indicator of A channel level power

DESCRIPTION OF THE SCREEN

BEFORE USING
THIS UNIT
You have just acquired an effective and powerful professional
unit. Take your time to discover how to use it.
1 Read the instructions carefully.
2 Before use, insert batteries in your device.
3 Test your unit on your biceps using the quick test procedure.
NON-THERAPEUTIC DEVICE
f f
16
BODY BEAUTIFUL (BB2M)
(SEE PAGE 3)
10.
11.
12.
OPERATION QUICK TEST
TESTING YOUR UNIT ON YOUR BICEPS
f
f
f
f
f
6.
Indicator of program
7.
Indicator of B channel level power
8.
Connexion module
9.
Colour module (or channel) indicator
Compartment for the batteries
Connection sockets to plug the 2 modules (USB)
Fastener buttons
Indicator of A channel level power
Indicator of program
Indicator of B channel level power
Used batteries : two red LED blink. Your device stops, even
if a program is running. Change the batteries.
Weak batteries indicator : two orange LED blink. Your
device is still on operation.
Disconnection warning light : blinks when the electrodes
are disconnected.
Connect 1 electrode to your device (see Chapter III. A).
f
Test the device with the PG02 program.
f
Increase power on this channel gradually. Press 1 for both
f
the bearing from 0 to 1, then 8 consecutive presses to the
following power levels.
You would begin to feel contractions, the device is working.
f
This discovery procedure shows your capacity in using the
f
unit's level of performance.