Charging The Batteries; Starting The Unit - SPORT-ELEC Multisport Pro Precision Mode D'emploi

* BEFORE USING THIS UNIT
You have just acquired an effective and powerful professional unit.
Take your time to discover how to use it.
1 - Read the instructions carefully
2 - Before using it, charge the unit (photo I. E, page 2)
* OPERATION QUICK TEST
TESTING YOUR UNIT ON YOUR QUADRICEPS
• Take the electrodes and lightly moisten them with a few drops of water (photo I. A, page 2).
• Connect it to the first channel (match the colours of the connectors, 2 by 2).
• Start the unit using the "
ON/OFF
• Increase power on this channel gradually.
• Once this procedure is done, you can start a program that best suits your needs.
*NON-THERAPEUTIC DEVICE
I. CHARGING THE BATTERIES
The unit contains rechargeable batteries. Before using it, charge it during 12 hours by connecting it to mains.
Do not use this unit while batteries are charging. When it is not used, charge the batteries for 12 hours every 4 months.
When the batteries are empty, the unit switches to standby automatically, protecting them against untimely discharging.
To charge the unit, connect the charger supplied with the unit (photo I. E, page 2)
BATTERY CHARGE DISPLAY
When the battery is charging, the battery indicator displays
The charging time countdown starts, from
Once charged, the number
When the charging is complete, unplug the adapter from the electrical outlet to insulate electric source.
When the charger is disconnected, the screen switches off.
When the battery indicator is empty
II. STARTING THE UNIT
STEP 1 DISPLAY - POWER ON
Beware while starting the device
Push briefly (maximum 1 second ) on "
All pictograms appear and blink for 3 seconds, then the front muscles blink.
If you make a long push, your screen flashes and indicates you the totality of the pictograms which it contains.
To stop the device, push briefly on "
Or to return in the menu made 2 brief pushes on "
STEP 2 SELECTING THE MUSCLE ZONE(S) TO STIMULATE
Choosing the 1 zone :
st
A
The screen displays , meaning you can choose a first muscle zone.
To choose the front muscles, validate with the "
The 1 muscle zone (quadriceps) blinks at the bottom.
st
To choose the back muscles, press the "
The 1 muscle zone (calves) blinks at the bottom.
st
To return to the front muscles, press the "
Press the " " key ( ) to move upwards and scroll the different muscle zones.
NEXT
To go back, press the "
PREVIOUS
After selecting the muscle group, validate using the "
12
" key ( ) and press the " " button 6 times.
OK
,
to .
appears in the left angle of the timer pictogram. The battery pictogram displays
, this means that it is discharged.
" button ( ).
ON/OFF
" button ( ).
ON/OFF
" button ( ).
ON/OFF
" key.
OK
" key ( ).
NEXT
" key ( ).
PREVIOUS
" key ( ).
" key
OK
, then to show the current charging status.
.