Ricoh D3210 Mode D'emploi page 12

1. Safety Information for this Machine
• To prevent fire or electric shock, disconnect the plug and the power cord from the wall outlet at
least once a year and check them. If any of the following conditions exist, do not use the plug
and the power cord continuously, and consult your dealer or service representative.
• There are burn marks on the plug
• The prongs on the plug are deformed
• The power cord's inner wires are exposed or broken
• The power cord's coating is cracked, dented, or damaged
• When the power cord is bent, the power turns off and on
• Part of the power cord becomes hot
• If the machine behaves unusually as follows, turn off the power immediately. After turning off the
power, make sure to disconnect the power cord plug from the wall outlet, and then contact your
service representative and report the problem. Continuously using the power cord can result in
fire or electric shock.
• The machine is emitting smoke
• The machine is emitting odors
• Metal objects or other foreign objects have fallen inside the machine
• Water or other fluids have fallen inside the machine
• Avoid taking the following actions because doing so can result in fire or electric shock:
• Using any power supply voltage or frequencies other than those that match the
specifications shown
• Using multi-socket adaptors
• Touching the prongs of the power cable's plug with anything metallic
• Avoid applying the following actions to power cords because doing so can result in fire or
electric shock:
• Damaging them
• Bundling them
• Modifying them
• Putting heavy objects on them
• Pulling them forcibly
• Bending them forcibly
8