FLUX MINIFLUX Notice D'instructions page 17

Caution!

Open the connected fittings before turning on the motor. Any
trapped air will force back into the container and the liquid
splashes.

Check the mains connection cable for damage before every use.

Keep the mains connection from solvents.

Plug the plug resp. connect the air supply hose.
Caution!

Only start the pump when it is tightly fixed on the container and
the stop valve of the container is open.

Turn on the motor.

Set the desired speed with the adjustment knob (regulation of the
delivery rate) at the motors FEM 4070, F 457 EL, F 458 EL and
F 460 Ex EL.

Never leave the pump unattended.
Conversion
Attention!

Only the motors mentioned in the operating instructions are
allowed.

Observe the explosion-proof document.
Remove pump from container
> Close the stop valve on the container.
> Unplug the plug resp. shut off the compressed air.
> Unscrew the union nut on the motor.
> Remove the motor from the pump.
> Provide a suitable collection container to catch liquid that may flow back from the
hose and the pump.
> Unscrew the union nut on the pump.
> Remove the pump from the container.
> Remove spilled liquid from the floor and dispose of it in an environmentally sound
manner.
> Avoid running dry in any case.
Transport
> For transport, remove pump from container.
In no way the pump may be transported with the container.
> The plug must be unplugged and the mains connections must be rolled up.
> Empty pump, hose and fittings before transport. Totally open the fittings for
emptying.
MINIFLUX 17 / 32