Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
Attention!
Attention - material damage!
Caution!
Caution!
Caution!
16 / 32
Make sure that the operator has read and understood the operat-
ing instructions.
The operators must be instructed before operating the pump.
Use pump only for its intended use.
Never leave the pump unattended.
If pump or hand nozzle (housing, valve, seal, hose...) materials
are not resistant to the liquid to be transferred, these must not
be used.
Observe chemical resistance and internal instructions.
Avoid dry running in any case.
Follow internal instructions.
Wear protective clothing.
(face and breathing protection, protective gloves, etc.)
Mind persons working in the area.
The maximum operating pressure and the operating temperature
must not be exceeded.
High operating pressure may result in the containers or the hoses
bursting or becoming loose.
Make sure that excessive pressure does not result when filling a
container.
Fill carefully and at an appropriate speed to avoid leakage of the
liquid.
After the filling, allow the excess to drip off the hand nozzle.
There may be liquid left in the outlet tube, which will then leak
out.
Remove spilled liquid from the floor and dispose of it in an
environmentally sound manner.
Place the motor on the pump.
Before plugging the plug and connecting the air supply hose to
the motor, set the Start/Stop switch to "0" (Stop).
Check motor, pump and hose for operational safety before every
use.
Pay attention to external damage.
MINIFLUX
Publicité
Table des Matières
