Included With Your Soclean 2 - SoClean 2 Guide D'utilisation

INCLUDED WITH YOUR SOCLEAN 2

Number Part name
Removable
1
Hose Slot Plug
SoClean
2
Chamber
3 Lid Gasket
4 SoClean Lid
5 Cartridge Filter
Hose Detect
6
Switch
Neutralizing
7
Pre-wash
6 | INCLUDED WITH YOUR SOCLEAN 2
SKU Description
This allows you to set up the SoClean 2 device on either the right or
PN1214 left side of your PAP machine. Place this plug in the Hose Slot that
you don't use.
Place your mask in here when you wake up. Close the Lid to ensure
N/A
that the daily automated cycle runs.
Ensures a tight seal around the SoClean Chamber when the SoClean
PN1215
2 Lid is closed. Do not close the Lid without this part in place.
Close the Lid after you place your mask in the SoClean Chamber to
N/A
ensure that the cycle occurs.
This Cartridge Filter converts ozone back into normal oxygen.
Remove outer plastic wrapper and blue tape prior to
PN1207UNI
installation. You can repurchase the Filter along with the Check
Valve as part of the Cartridge Filter Kit.
The Hose Detect Switch detects when the SoClean 2 is configured
for operation by detecting the presence of the hose in the Hose Slot
when the Lid is closed. If no hose is detected, the SoClean 2 will
N/A not run a cycle. Hose Detect Switch operation can be inspected
by gently pushing down and releasing the grey plastic switch and
hearing an audible click. The switch should move freely down and up
when pressed gently.
The Neutralizing Pre-wash removes any material or odor that could
PN1101 react with ozone. Wash your PAP equipment following the PAP
1.5 oz. manufacturer's instructions before connecting the SoClean 2 device,
or when you receive a new mask, hose or reservoir.