SoClean 2 Guide D'utilisation page 15

Number Button(s)/Display
7 Status light
8
Messages
The SoClean 2 display panel shows messages that may require action. This list shows the messages and how to correct them:
Message
Hose not present. Cycle will not run.
Order Filter Kit.
Cycle in process. Do not open the Lid!
Description
The light below the display indicates the cycle status.
See pages 19, 20 and 21 for instructions on scheduling and
manual operation. A green light indicates that the cycle is complete,
and you can remove your PAP mask from the SoClean Chamber
and use your PAP machine.
RED – The SoClean 2 is operating and generating ozone.
YELLOW
and dissipating.
GREEN
time. The light turns off when you open the Lid.
Sets daily start time. See page 20.
Changes clock between the 24-hour or 12-hour format. See page 19.
and
What to Do
Ensure that the PAP Hose is seated securely in the Hose Slot.
Check that the Removable Hose Slot Plug is seated correctly on the
other side. See page 22.
Your Cartridge Filter has reached the end of its life based on your
use. See page 25.
Ozone present. The SoClean 2 is performing a cycle. This takes
approximately 2 hours. The green cycle indicator light means that
it is complete. You can now open the Lid, take out your mask and
use your PAP machine.
– The 2-hour cycle is still active. The ozone is working
– Cycle is complete. You can use your PAP machine any
ENG | 11