Included With Your Soclean 2 - SoClean 2 Guide D'utilisation

INCLUDED WITH YOUR SOCLEAN 2

Number Part name
Removable
1
hose slot plug
Disinfecting
2
chamber
3 Lid gasket
4 SoClean lid
5 Cartridge filter
Hose detect
6
switch
Neutralising
7
pre-wash
6 | INCLUDED WITH YOUR SOCLEAN 2
SKU Description
This allows you to set up the SoClean 2 device on either the right or
PN1214 left side of your PAP machine. Place this plug in the hose slot that
you don't use.
Place your mask in here when you wake up. Close the lid to ensure
N/A
that the daily automated disinfecting cycle runs.
Ensures a tight seal around the Disinfecting chamber when the
PN1215
SoClean 2 lid is closed. Do not close the lid without this part in place.
Close the lid after you place your mask in the Disinfecting chamber
N/A
to ensure that the daily automated disinfecting cycle occurs.
This Cartridge filter converts ozone back into normal oxygen.
Remove outer plastic wrapper and blue tape prior to
PN1207
installation. You can repurchase the filter along with the Check
valve as part of the Cartridge filter kit.
The Hose detect switch detects when the SoClean 2 is configured
for operation by detecting the presence of the hose in the hose slot
when the lid is closed. If no hose is detected, the SoClean 2 will
N/A not run a disinfecting cycle. Hose detect switch operation can be
inspected by gently pushing down and releasing the grey plastic
switch and hearing an audible click. The switch should move freely
down and up when pressed gently.
The Neutralising pre-wash removes any material or odour that could
react with ozone. Wash your PAP equipment following the PAP
PN1101
manufacturer's instructions before connecting the SoClean 2 device,
or when you receive a new mask, hose or reservoir.