Soclean 2 Control Panel - SoClean 2 Guide D'utilisation

SOCLEAN 2 CONTROL PANEL

1
8
WARNING: In the event of loss of power to your home or the SoClean 2, ensure the correct clock time and daily start time are set
on the SoClean 2 before using your PAP machine. Failure to do so may result in the SoClean 2 operating at an unexpected time.
Number Button(s)/Display
1
2 Cycle run time (duration)
3 Current time
4 Daily start time
5
6
10 | SOCLEAN 2 CONTROL PANEL
2 3
Description
Sets the clock. See page 19.
The duration, in minutes, of the cycle. See page 20 to set this. A duration
of 12 minutes is required to achieve the most effective maintenance.
The current time. See page 19 to set. Default time is set to 12:00 a.m.
The time of day when the cycle starts. See page 20 to set the schedule.
The default daily cycle start time is set to 10:00 a.m.
Starts a cycle immediately. The scheduled cycle will still occur.
See page 21.
Decreases (-) or increases (+) time.
4 5
6
7