Set Time Format - SoClean 2 Guide D'utilisation

SET CLOCK AND CYCLE SCHEDULE
WARNING: Ensure the correct clock time and cycle start
time are set on your SoClean 2 before using your PAP
machine. Pay particular attention to the AM/PM setting if
using the 12-hr mode. Failure to do so may result in the
SoClean 2 device operating at an unexpected time.
If you unplug the SoClean 2 or experience a power loss, you will need to reset the current time only.
The settings will remain saved. For safe use, operate your SoClean 2 only as instructed in this user manual.
Your SoClean 2 timer allows you to completely automate your daily cycle after connecting to your PAP. The SoClean 2 comes
preset to start a 7-minute cycle at 10:00 a.m. daily. However, you must set the clock to your current time. The following
procedures describe how to set the clock, schedule and start a cycle immediately.
Set Current Time
Set Current Time
Time Format:
12h
24h
WARNING: In the event of loss of power to your home or
the SoClean 2, ensure the correct clock time and daily
start time are set on the SoClean 2 before using your PAP
machine. Failure to do so may result in the SoClean 2
device operating at an unexpected time.
Set the clock/current time
1. Press the button.
2. Change the time by pushing either the
button until your current time is reached. By holding
down the button, the time moves faster. Press the
button once more to store your time and return to the
home screen.

Set time format

Default is 12-hour format.
To display in 24-hour format (military time):
1. Press the and buttons simultaneously.
2. With 'Time Format' selected, press the
3. Choose either the 12- or 24-hour format by using
the button.
4. Press the button to select preferred setting.
5. Press the button to save.
or
button.
ENG | 19