Non-Combustible Finishing Material - Napoleon HDX35NT Instructions D'installation Et D'opération

32
5.4

NON-COMBUSTIBLE FINISHING MATERIAL

WARNING: The appliance opening may be recessed in non-combustible facing material provided it does not
EN
project more than 2" (51mm) past the face of the appliance. If greater projections are desired, increase the
clearance to the sides and top by 2" (51mm) for every additional 1" (25mm) of projection. If using an optional
surround, then 2" (51mm) clearance from the surround is required before projecting out a maximum 2"
(51mm). If greater projections are desired, increase the clearance from the surround by 2" (51mm) for every
1" (25mm) of additional projection.
W415-1434 / 06.09.15
A
A
6" (152mm)
4" (102mm)
2" (51mm)
0" (0mm)
SECTION A-A
4" (102mm)
3" (76mm)
2" (51mm)
1" (25mm)
TOP OF
APPLIANCE
DOOR
71.5C