Installing Non-Combustible Board - Napoleon GX70NTE-1 Manuel D'installation Et D'opération

finishing
EN

10.5 installing non-combustible board

WARNING
!
Non-combustible facing material must not project more than 4" (101.6mm) from the face of the door (all four
sides). If greater projections are desired, increase the clearance to the sides, bottom and top by 2" (50.8mm) for
every additional 1" (25.4mm) of projection. If using an optional surround, the same rule applies, starting from the
top of the surround. Ensure clearances are maintained for surround removal, as it must lift off the appliance for
maintenance.
A
A
4"
(101.6mm)
2" (50.8mm)
Optional
surround
36
W415-1793 / B / 08.23.18
6" (152.4mm)
5" (127mm)
4" (101.6mm)
Top of
appliance
Door
Section A - A
B
B
3"(76.2mm)
2" (50.8mm)
0" (0mm)
Section B - B
44.4
6" (152.4mm)
5" (127mm)
4" (101.6mm)
Top of
appliance
Door