7. TROUBLeSHOOTinG
The lamp does not switch on
Light intensity is considerably low
Handles will not come off or are
difficult to remove
8. TecHnicAL SPeciFicATiOn
Power supply voltage
Power absorption
Protection against electrical hazards
Weight (without transformer)
8.1 Optical performances at 1000 mm from the target
Dimensions of the spot of light
Lux
Color Temperature
(*) Typical value
The distance between the lamp and the target affect the optical performance.
!
The lamp is designed to have the best performance at a distance of 1000 mm.
- Check on the connected of power supply.
Check on the status of the fuses.
If none of these causes is the case contact
Faro's Service.
- Clean the screen.
If the light intensity does not return to its original
intensity contact Faro's Service.
- Check the position of the locking screws on the
handle. They should be completely open.
: 17-24V ~ (22-35 V ) ±10% - 50/60 Hz
: 23 VA
: Class II
: 5 kg
: 300 mm x 200 mm (*)
: 3.000 to 35.000 lux (*)
: 5.000 K (*)
23 23