Technical Specifications; Product Identification - CAMPAGNOLA GSM EL TORO K EVOLUTION Manuel D'utilisation Et D'entretien

- the safety devices are activated;
- no one is working on the equipment.

3 TECHNICAL SPECIFICATIONS

Product identification

The identification CE plate/label (Figure 1) is applied to each machine/tool.
The model, serial number and year of manufacture are shown on the manufacturer's CE plate and affixed on the ma-
chine. The CE plate is applied on the machine/tool and shows the data and symbols described below:
1) Conformity marking according to directive 2006/42/EC.
2) Company name and complete address of the manufacturer.
3) The compulsory requirement for all personnel in charge of use and/or maintenance of the tool to read the use and
maintenance manual.
4) Tool designation.
5) Type of tool - Type/code designation of the tool.
6) Serial number.
7) Year of manufacture, i.e. the year in which the manufacturing process was concluded.
8) Information pursuant to Directive "WEEE" 2012/19/EU: Electric and electronic waste may contain hazardous
substances for the environment and human health and therefore must not be disposed of with domestic waste,
they must be collected in dedicated collection centres.
9) Tool supply voltage (only for battery powered electrically supplied tools).
1
8
The machine's plate is placed on the machine (Figure 2) as indicated in the following figure.
Use and maintenance manual – Instructions
Original instructions Rev.: 00, Date 04/03/2022
6
2
Figure 1
Figure 2
3
4
5
7
Page 23