Hiding/Displaying The Clock; Safety Blocking - Pando PHV9400 Mode D'emploi

Basic settings
Type
Soft water
Medium water
Hard water
Water level calibration
After setting the water hardness, appears
in the Display and the water level light shines.

Hiding/Displaying the Clock

If the clock display disturbs you, you can hide it by
pressing the Clock key for 3 seconds. The dots
that separate the hours and minutes will flash but
the rest of the clock display will be hidden.

Safety blocking

The oven operation can be blocked (for example,
to stop it from being used by children).
1. To block the oven, press the Safety Block
key (2) for 3 seconds. You will hear a sound
signal and Safety Block indicator will
3.
Ca + Mg English deg.
(ppm) [°eH]
0 to 150 0 to 11
151 to 350 12 to 25
501 to 500 26 to 35
Water hardness
French deg.
[°dF]
0 to 15
16 to 35
36 to 50
Please take the Water tank completely off. Wait
untill the display and the Water tank light
disappears.
If you want to see the clock display again, press
the Clock key again for 3 seconds.
illuminate. The oven is blocked in this state
and cannot be used.
2. To unblock the oven, press the Safety Block
key (2) again for 3 seconds. You will hear a
sound signal and the Safety Block indicator
will
German deg.
Display
[°dH]
0 to 8
9 to 20
21 to 28
turn
EN
1
2
3
off.
7