Care And Maintenance; Cleaning The Cooking Space; Removing The Appliance Door; Removing The Shelf Guides - Pando PHV9400 Mode D'emploi

Care and maintenance

Cleaning the cooking space

Avoid using abrasive cleaners such as scouring
pads, steel wool, etc. as they can damage the
surface.
Wipe the cooking space clean using a damp cloth
whilst the appliance is still warm. Finish off by
drying the cooking space.
For ease of cleaning, the shelf guides can be
removed (see the following chapter).

Removing the shelf guides

Unscrew and remove the knurled nuts 1 in the
front of the shelf guides in an anti-clockwise
Unscrew and loosen the knurled nuts 2 in the
back of the shelf guides in an anti-clockwise
direction. Do not completely remove these nuts.
Pull the shelf guides to the inside of the cavity and
remove from the front.
To put them back, insert the shelf guides into the
knurled nuts 2 in the back and position on the
screws in the front. Screw the knurled nuts 1 and
2 in a clockwise direction till tight.
direction.
.

Removing the appliance door

1. Open the appliance door as far as it will go.
2. Insert 2 pins inside the holes in the hinges.
3. Close the appliance door just enough that it
can be lifted out.
4. To reassemble, push the hinges into the holes
from the front.
5. Open the appliance door as far as it will go and
remove the pins.
EN
21