Quick Guide - APRILIA eSR1 Mode D'emploi

• Prior to using the item for the first time, charge to 100%.
• Check tyre pressure (see side of tyre for recommended value). If the item does not reach
at least 60% of the declared kms, or the maximum speed within the first 3 months of
use, it is likely that the wheels have deflated once more. In this case, restore pressure as
indicated.
• Check and adjust the brakes.
• Turn on the display.
• Place the item on a flat surface.
• Hold the handlebar firmly using both hands. Step onto the footrest with one foot and use
the other to give yourself a gentle push and accelerate.
CAUTION
Zero Start Function: the throttle is activated once the forward speed exceeds 3 km/h.
For safety reasons, the item is initially set up to avoid standing starts.
• When riding the item, tilt your body in the direction of travel when turning and slowly turn
the handlebar.
• To stop the item, release the throttle, pull the brake lever
• To get off, first stop the item completely. Getting off the moving item can cause injury.
• Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for
recommended value), wheel wear, throttle and charge status of battery.
Brake lever adjustment
eSR2 /eSR2 EVO
It is possible to adjust the position of the brake
lever, if necessary, by unscrewing the screw (A).
Once the position has been adjusted, tighten the
screw (A).

6. Quick guide

eSR1
A
It is possible to adjust the position of the brake
lever, if necessary, by unscrewing the screw (A).
Once the position has been adjusted, tighten the
screw (A).
19
A