Childproof Lock; Pause - Atag HI3271W Mode D'emploi

OPERATION

Childproof lock

Pause

EN 14
Your induction hob is equipped with a childproof lock that lets you lock
the appliance. It prevents unintended switching on.
Switching on the childproof lock
1. Press the childproof lock button.
A double beep will be heard. All buttons are active now, except for
the childproof lock button. The hob first switches to the eco stand-
by mode and then to the childproof lock mode. The red light is
constantly on.
2. Press the childproof lock button again for 2 seconds to get the hob
of the childproof lock.
A single beep will be heard. The hob is now in the stand-by mode.
The red light next to the childproof lock button is out.
Tip
Set the hob to the childproof lock mode before cleaning the hob to
prevent it from accidentally switching on.
Did you know that
When the hob is set to the childproof lock, is uses just as little energy
as when it is in the eco stand-by mode.
With this pause function, you can set the entire hob to 'pause' for
5 minutes during cooking. In this way you can leave or clean the hob in
a safe way during a short period of time, without losing settings.
Switching the hob to the pause mode
Press the pause button.
A double beep will be heard, the settings change into a lower setting
and the red light next to the pause button flashes.
• The set timer/kitchen timer stops.
• The cooking zone is automatically changed to a lower setting.
• All buttons are inactive except for the childproof lock and the pause
button. The on/off button of the cooking zone also remains active, it
does however react with a delay of two seconds.