Controls And Connections - Marmitek SPEAKERLINK 65 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INTRODUCTION
Your Wireless Audio Transmitter Kit consists of a transmitter base unit which connects to the audio
(line) out jack on any audio source, a receiver unit with built-in speaker drivers to which you
connect your own speakers,* and a remote control that lets you control the volume, balance, bass,
treble, etc.
The Audio Transmitter converts the audio signal from your CD player, stereo, PC sound card, etc.
into a radio frequency (RF) signal and transmits it (even through walls) to the Audio Receiver unit.
The Audio Receiver converts the signal back to its original form, amplifies the signal, and passes it
to your connected speakers.
The remote is also a Universal Remote so it can also control your TV, VCR, etc. It can also control an
MP3, DVD, and CD player in your PC when used with an additional MP3-Receiver (art. nr. 09255)
and software. It can even control lights and appliances around your home when used with
Marmitek X10 Modules (see www.marmitek.com).
Place the receiver and speakers on your patio for example, and listen to high quality audio outside
while you're having a barbecue. Do not leave the unit outside however, see below.
* You can use any speakers rated at 4 to 8 Ohms, and a minimum power rating of 10W.
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or
moisture.

1 CONTROLS AND CONNECTIONS

1.1 Transmitter
1.
2.4 GHz Antenna
2.
433 MHz Antenna (for remote control of your equipment with the enclosed SpeakerLink 65
Remote. See chapter 5)
3.
ON-OFF Switch (on side)
4.
2.4 GHz Channel Switch (on top)
5.
Audio In Jacks
6.
Power Supply Jack (small power supply)
7.
Video In Jack (will only be connected when using optional video receiver)
8.
Output for IR LED cable
1.2 Receiver
1.
2.4 GHz Antenna
2.
ON-OFF Switch (on side)
3.
2.4 GHz Channel Switch (on bottom)
4.
Heat Sink
5.
Audio Out (to speakers, 4-8 Ohm, 10W min.)
6.
433 MHz Receiver Antenna (for reception of the remote's signal for controlling
the built-in amplifier)
7.
Power Supply Jack (big power supply)
SPEAKERLINK
3

Publicité

Table des Matières
loading

Table des Matières