Marmitek SPEAKERLINK 65 Mode D'emploi page 6

Also, after you first press AUDIO followed by AMP (button 4) OK restores the default settings for
balance, bass, and treble on the SpeakerLink 65 Amplifier/ Speaker Driver.
PLAY, REW, FF, STOP, PAUSE, REC
Works the same as on your original remote. You must press the REC button twice to begin
recording.
6
CHAN +/- Works like your original remote. Also, after you
first press AUDIO followed by AMP (button 4) CHAN+
adjusts balance to right channel, reduces left channel
volume; CHAN- adjusts balance to left channel, reduces
right channel volume on the SpeakerLink 65
Amplifier/Speaker Driver.
M (Mute)
Works the same as your original remote. Also, after you
first press AUDIO followed by AMP (button 4) M (Mute)
toggles the audio output of the SpeakerLink 65
Amplifier/Speaker Driver ON/OFF.
0-9
Used as your original remote and to enter device codes.
Also, after you first press AUDIO, buttons 1, 2, and 3
perform as function buttons for MP3, DVD and CD
respectively when used with an optional MP3 receiver
(art. nr. 09255) and PC software. For more information,
see www.marmitek.com). Also, after you first press
AUDIO, button 4 (AMP) performs as a function button to
select the SpeakerLink 65 Amplifier/Speaker Driver (see
part 4.5).
ENTER
Same as your original remote.
A•B
Toggles between TV and Video Mode.
MENU
Access the Menu function of the device you are
controlling (if available).
EXIT
Used to exit Menu functions.
NAVIGATION ARROWS
Used to navigate and adjust menu items of the device
you are controlling. Also, after you first press AUDIO
followed by AMP (button 4) the UP navigation button
increases bass, DOWN decreases bass, RIGHT increases
treble, LEFT decreases treble on the SpeakerLink 65
Amplifier/Speaker Driver.
OK
Selects menu items of the device you are controlling.
MARMITEK