Connecting With An Audio Cable; Battery Life And Standby Time; Battery Almost Empty - Marmitek BoomBoom 150 Guide Utilisateur

CONNECTING WITH AN AUDIO CABLE

The Bluetooth connection can be switched to a wired
connection by plugging in the 3.5mm audio jack. The volume
key function will be disabled in the wired connection mode.
Simply unplug the 3.5mm audio jack to revert back to the
Bluetooth connection.

BATTERY LIFE AND STANDBY TIME

Once the battery has been fully charged it will last for about 4
hours via BlueTooth, or 5-6 hors via audio cable. You can also
use the BoomBoom150/152 with the mini USB cable connected
to a PC, Mac or USB power adapter. The battery then remains
charged.

BATTERY ALMOST EMPTY

When the BoomBoom150/152's battery is almost empty, the
red LED will blink once every 20 seconds. Follow the steps
given earlier to charge the battery.
6 © MARMITEK