Back Panel Cap & Connections; Aux-In; Charging & Usb Connection - Marmitek BOOMBOOM 260 Guide Utilisateur

BACK PANEL CAP & CONNECTIONS
6 gray rubber gasket
back panel Lines
NOTE: A removable LANYARD is included with the
BoomBoom 260 and is intended to assist in avoiding
misplacing the back panel CAP. Attach one end to the
nylon tab on the CAP and the other end to the handle.

AUX-IN

AUX-IN can be used as an optional connection to play an
audio device using a 3.5mm audio cable connection.
CHARGING & USB CONNECTION
x Charge the built-in rechargeable battery using the USB
cord (included) connected to your computer OR
connected to the USB-to-AC power adapter (included)
and a wall power outlet.
x When connected to a power source via the USB
connection on the back panel, the Battery LED on the top
panel will indicate the power status. IF not connected,
the LED will NOT indicate the power status. A RED LED
indicates charging is in progress. A GREEN LED indicates
the battery is fully charged.
BOOMBOOM 260
6
9