Installation Instructions; Make The Worktop Recess - Amica KMI754000C Notice D'utilisation

INSTALLATION
INSTRUCTIONS

Make the worktop recess

The worktop must be flat and level. Edge of the worktop near the wall
must be sealed to prevent ingress of water or other liquids.
Worktop must be made of materials, including veneer and adhesives,
resistant to a temperature of 100°C. Otherwise, veneer could come off
or surface of the worktop become deformed.
Edge of the opening should be sealed with suitable materials to prevent
ingress of water.
Ensure sufficient clearance below the hob to allow proper air circula-
tion and prevent overheating. Please read on for more information on
correct clearance.
Worktop opening must be cut to dimensions as shown on figure below
(measurement unit [mm]):
* For straight hoods, the minimum distance of the hood from the
worktop should be 650 mm, for inclined hoods, the distance should be
450 mm
- 36 -