Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
1. Technique
1.1 Technical Data
Material of pump sleeve:
Letters in drawing are found in section „(.)" - Numbers in drawing can be found in page 2.
1.2 Unit is equipped with:
• Hose (S) oil resistant, length 100 cm
2. Application
2.1 Vacuum pump SAUGFIX is designed to suck liquid lubricates and other not aggressive
and not combustible liquids.
2.2 Do not use with:
• liquids with temperatures of above 30 °C.
3. Safety Warnings
3.1 While pumping, air will be moved out of the tank. This air can be contaminated with
gas. Please, make sure that the operator will be protected. Protection clothes and face
masks have to be worn. Avoid ignition sources in the environment and make sure that
4. Operating Instructions
pump (P)
direction. Depressurise unit to - 0,7 bar.
4.3 Put end of suction tube (SK)
ve. If engine oil is sucked out of an engine it is advised to tilt engine towards the suction
point. To accelerate the suction process it is advised that the oil is not cold.
the unit.
Brass, soft-soldered
(K) of brass, suction tube (SK) 8 mm, made of PVC (polyvinylchloride).
(V) to make sure that vacuum will not go above - 0,7 bar.
(K)
5
ENGLISH
(U) is on the
-
Publicité
Table des Matières
