Technical Specifications - sylvac D50S-PRO Manuel D'utilisation

9. Technical specifications

Case
Front panel
Rear panel
Keyboard
Dimensions
Degree of IP protection
Weight of unit
Consumption
Storage temperature
Operating temperature
Dimensions (digits)
Thermal stabilization
when switch ON
Resolution
Accuracy
Accuracy
Coupled unit and probe
Number of display
sequences
In Terblend plastic (=ASA + polycarbonate) :
Resistant to alcohol, glycols, most oils and greases,
diluted acids and water.
Non-resistant to
acetones, concentrated mineral acids, ammonia gas an
its dilutions.
Polyester
Aluminium varnish
Flat with plastic dome tactile response
Width 180 mm, depth 75mm , height 50 mm
IP 40 (according to IEC 529)
0.3 kg (0.675 lb)
<250mA on Sylvac charger
from –20° C to +45° C
from +5° C to +40° C
height 13.2 mm
15 minutes minimum
0.1 um (.00001'')
Probe P2 : 1.5um
Probe P5 : 1.6um
Probe P10 : 1.6um
Probe P25 : 1.9um
Probe P50 : 3.9um
Probe P2 : 0.5um
Probe P5 : 0.6um
Probe P10 : 0.6um
Probe P25 : 0.8um
Probe P50 : 1.5um
0.1um : 3/s depending of Probe (1 channel)
1.5/s depending of Probes (2 channels)
1um : 10/s depending of Probe (1 channel)
5/s depending of Probes (2 channels)
57
aromatic hydrocarbons,,
E
esters,