Control Panel Description; Function Description - Apex iCH Prime Instructions D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 87
iCH Prime/English
4. Operation
NOTE: Always read the operating instructions before use.

4.1 Control Panel Description

Buttons on control panel and main use of the buttons:
START/STANDBY
To start the treatment, simply press the "START/STANDBY" button. To stop the
treatment, press the "START/STANDBY" button again. The display will switch
between [STANDBY] and Therapy Pressure [ XX.X cmH
cmH
MENU
Press the "MENU" button to enter the setting mode when device is in standby mode.
The adjustment setting includes ramp time selection, ramp starting pressure, therapy
pressure adjustment, alarm ON/OFF, clock alarm setting, compliance meter, and total
operating meter. When each setting's value has been changed, press "MENU" for
confirmation and press "MENU" again for next setting selection. Please refer to 4.3
Function Description section for detailed information.
UP
Press the "UP" button to increase the selected value.
DOWN
Press the "DOWN" button to decrease the selected value.

4.2 Function Description

O or hPa unit.
2
O] or [ XX.X hPa] in
2
8

Publicité

Table des Matières
loading

Table des Matières