Control Panel Description - Apex iCH Auto Instructions D'utilisation

iCH Auto/English
4. Operation
NOTE: Always read the operating instructions before use.

4.1 Control Panel Description

Buttons on control panel and main use of the buttons:
START/STANDBY
To start the treatment, simply press the
press the
Therapy Pressure
MENU
Press the
adjustment setting includes ramp time selection, ramp starting pressure, therapy
pressure adjustment, alarm ON/OFF, clock alarm setting, compliance meter, and total
operating meter. When each setting's value has been changed, press
confirmation and press
Function Description section for detailed information.
UP
Press the
DOWN
Press the
"START/STANDBY"
button again. The display will switch between
[ XX.X cmH O]
2
"MENU"
button to enter the setting mode when device is in standby mode. The
"MENU"
"UP"
button to increase the selected value.
"DOWN"
button to decrease the selected value.
"START/STANDBY"
[ XX.X hPa]
or in cmH O or hPa unit.
2
again for next setting selection. Please refer to 4.3
button. To stop the treatment,
[STANDBY]
"MENU"
8
and
for