Control Panel Description - Apex XT Auto Mode D'emploi

XT Auto/ English
4. Operation
NOTE: Always read the operating instruction before use.

4.1 Control Panel Description

Buttons arrangement on control panel and main use of the buttons:
START/STANDBY
To start the treatment, simply press the
press the
Therapy Pressure
MENU
Press the
adjustment setting includes mode selection, ramp time selection, ramp starting pressure,
therapy pressure adjustment, initial pressure adjustment, maximum pressure adjustment,
minimum pressure adjustment, alarm ON/OFF, clock alarm and clock setting, compliance
meter, and total operating meter. When each setting's value has been changed, press
"MENU"
4.2 Function Description section for detailed information.
UP
Press the
DOWN
Press the
"START/STANDBY"
[ XX.X cmH
2
"MENU" button to enter the setting mode when device is in standby mode. The
for confirmation and press
"UP"
button to increase the value.
"DOWN"
button to decrease the value.
"START/STANDBY"
button again. The display will switch between
O]
in cmH O unit.
2
"MENU"
again for next setting selection. Please refer to
button. To stop the treatment,
[STANDBY]
7
and