Apex iCH Prime Instructions D'utilisation page 13

iCH Prime/English
(7) Compliance Meter
Press "MENU" button to select the [CM XXXX.X hr] menu. The compliance meter records
the total therapy hours for the device. The compliance meter should be re-set only by the
provider, a respiratory therapist or by a doctor.
(8) Alarm
Press "MENU" button to select the [Alarm on/off] menu, and press "UP" or "DOWN" button
to set the alarm on or off. When the alarm is turned on, the audible alarm will activate with
warning messages shown on the LCD display. Set alarm off to mute the audible alarm.
(9) Clock Alarm
Press "MENU" button to select the [Clock Alarm on/off] menu and press "UP" or "DOWN"
button to set the clock alarm on or off. When the clock alarm is set on, the display will show
the time on the left side. Press "UP" or "DOWN" button to set the time to wake you up. Once
the clock alarm is activated, press the start/standby button to mute the audible alarm.
(10) Clock
Press "MENU" button to select the [Clock XX:XX] menu, press "UP" or "DOWN" button to
set the current time.
NOTE: If you set a new time that occurs in the past then the "Invalid Data" which does
(11) Turning off the Device
Remove the power cord from the electrical outlet, and disconnect power cord from the power
socket on the right side of the device.
NOTE: Once the setting is confirmed, press the "MENU" button. Otherwise, the device
(12) Compliance Information
Hold "UP" and "DOWN" button to read compliance information while in the standby screen.
Press "START/STANDBY" button to go back to standby screen
i. Period
When entering the compliance information mode, the LCD screen should start
blinking to allow you to select the period. Press "UP" or "DOWN" button to select the
period from 1 day to 90 days. After selecting the period, press "MENU" to confirm.
Press "DOWN" button to read more compliance information.
ii. Usage Hours / Compliance Hours
The Usage Hours [XXX hrs] records the therapy hours under the set time frame.
Press "MENU" button to reselect the time frame, or press "DOWN" button to read
more compliance information.
iii. Average Compliance Hours per day
The Average Compliance Hours per day [X.X
compliance hours per day over the different time frame. Press "UP" or "DOWN"
button to read last or next compliance information.
iv. Days＞4 Hours
The Days＞4 Hours [
exceeded 4 hours over the different time frame. Press "UP" or "DOWN" button to
not exist for this new period would be erased.
will automatically go back to standby without saving the modification if no action
is taken in 20 seconds.
＞
4 X.X d] records the cumulative number of days that
hrs/d] records the average
10