Apex iCH Prime Instructions D'utilisation page 26

iCH Prime/English
Surge
IEC61000-4-5
Voltage dips, short
interruptions and voltage
variations on power
supply input lines
IEC61000-4-11
Power frequency
(50/60Hz) magnetic field
IEC61000-4-8
Conducted RF
IEC 61000-4-6
Radiated RF EM
Fields
IEC61000-4-3
± 1 kV line(s) to
line(s)
± 2 kV line(s) to earth
Voltage Dips:
i) 100% reduction for 0.5 period,
ii) 100% reduction for 1 period,
iii) 30% reduction for 25/30 period,
Voltage Interruptions:
100% reduction for 250/300 period
30 A/m
3 Vrms
0,15 MHz – 80 MHz
6 Vrms in ISM bands
between 0,15 MHz and
80 MHz
80 % AM at 1 kHz
3 V/m 80 MHz to 2.7
GHz
80 % AM at 1 kHz
385-6000 MHz,
9-28V/m, 80%
AM(1kHz) pulse mode
and other modulation
± 1 kV line(s) to ± 1 kV line(s) to
line(s) line(s)
100-240V
30 A/m 30 A/m
3 Vrms
0,15 MHz – 80
MHz
6 Vrms in ISM
and amateur
radio bands 6Vrms
between
0,15 MHz and 80
MHz
80 % AM at 1
kHz
10 V/m 80 MHz
to 2,7 GHz
80 % AM at 1
kHz
10V/m
385-6000 MHz,
9-28V/m, 80%
AM(1kHz) pulse
mode and other
modulation
Mains power quality
should be that of atypical
commercial or hospital
environment.
Mains power quality
should be that of a
typical commercial or
hospital environment. If
the user of this device
requires continued
operation during power
mains interruptions, it is
recommended that the
device be powered from
an uninterruptible power
supply or a battery.
Power frequency
magnetic fields should
be at levels
characteristic of a typical
location in a typical
commercial or hospital
environment.
Portable and mobile RF
communications
equipment should be
used no closer to any
part of this device,
including cables, than
there commended
separation distance
calculated from the
equation applicable to
the frequency of the
transmitter.
Recommended
separation distance
=
150kHz to
80MHz
=0.6
80MHz to
800MHz
d =1.2
800 MHz
to 2.7GHz
Where P is the
maximum output power
rating of the transmitter
in watts (W) according to
23