Factory Reset; Disposal - oventrop Aktor MH CON B ENOCEAN Notice D'installation Et D'utilisation

Disposal

7. Factory reset

1. Remove one battery.
2. Press the "teach in"/adjustment
button (A) and keep it pressed until
the battery has been reinserted.
3. Release the "teach in"/adjustment
button (A) – drive shaft will be reset by
the actuator (installation position).
A double fl ashing of the LEDs
X
(alternately red and green, see fl ash
codes) signalizes that the factory
settings were restored.
8. Disposal
This product must not be disposed of with the stand-
ard waste, but separately as electrical waste. If re-
quired contact the local authorities regarding informa-
tion on environmentally friendly disposal.
Subject to technical modifi cations
without notice.
For an overview of our global presence visit www.oventrop.de
"Aktor MH CON B (ENOCEAN)"
115076580
12/12
A
10/2016 (V1.0)