Function - oventrop Aktor MH CON B ENOCEAN Notice D'installation Et D'utilisation

Technical description

3.3 Function

The actuator opens and closes the radiator valve via a "drive shaft" (S). When
leaving the factory, the drive shaft is retracted (installation position) to facilitate
installation of the actuator (see chapter 4). In this position, the radiator valve
is fully open.
S
LED fl ash codes and their meanings
red LED1
green
x x
x x
x x
x x x
x
x
number
LED2 fl ashing
of
fl ashes
x 3 slowly
x 3 slowly
x 5 quickly
slowly
x 2 alterna-
conti-
x slowly
nuously
4x quickly
conti-
x
nuously pulsating
4/12
"Aktor MH CON B (ENOCEAN)"
A
Description
Installation/calibration/adaptation/
communication test not successful
Installation/calibration/adaptation/
communication test successful
Drive shaft retracted
(installation position)
Reset to factory settings
ting
Calibration has not been carried
out or was forgotten
System error