Description Of The Device - RADEMACHER Superrollo RM10MSF Notice De Montage Et D'utilisation

Description of the device

■ Use only genuine replacement parts and accessories from superrollo.
Information on this can be found in the chapter entitled Accessories from
page 28
■ Make sure that repairs on the device are only carried out by the superrollo
customer service.
■ In particular, observe DIN 12045 - additional protective facilities and
terminations for facades and wall openings which are equipped with windows
and French windows.
Avoiding being locked out
■ Make sure that you are located inside the building when a door's roller shutter is
automatically closed.
Avoiding damage
■ Use the device in dry rooms only.
■ Only connect the device to a 230 V~50 Hz current connection which is fused in
the building.
■ Use the device with smoothly running roller shutters only.
■ Use only genuine replacement parts and accessories from superrollo.
Description of the device
Scope of delivery
Tubular motor
Adjustment tool
Driver
Securing clip
18
Structural features of the information on dangers
The following categories of information on dangers are contained in these
operating instructions:
DANGER
Notices containing the word DANGER warn of a hazardous
situation which leads to death or severe injuries.
WARNING
Notices containing the word WARNING warn of a hazardous
situation which may possibly lead to death or severe injuries.
CAUTION
Notices containing the word CAUTION warn of a situation which
leads to slight or moderate injuries.
Structural features of notices regarding material and
environmental damage
ATTENTION
These notices warn of a situation which leads to material or
environmental damage.
2 x cotter pin
Drive bearing
Adapter
Remote control