Safety Instructions - Ribimex Ribiland PRS660 Manuel D'instructions Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

III. SAFETY INSTRUCTIONS
WARNING! When using electric tools basic safety precautions should always be followed to reduce
the risk of fire, electric shock and personal injury including the following.
Read all these instructions before attempting to operate this product and save these instructions.
3.1- General safety instructions
1. Keep work area clear
Cluttered areas and benches invite injuries.
2. Consider work area environment
- Do not expose tool to rain, moisture or humidity.
- Do not use tools in damp or wet locations.
- Keep work area well lit (natural light or sufficient artificial lighting).
- Do not use the machine and do not work on it in proximity of inflammable liquids and vapors
thereof.
- Keep work area well ventilated.
3. Guard against electric shock
Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).
4. Keep other persons away
- Do not let persons, especially children, not involved in the work touch the tool or the extension cord
and keep them away from the work area.
- Keep the product away from children or from their environment. Never allow children to operate
the tool. Children should be supervised to ensure that they do not play with the tool.
5. Store idle tools
When not in use, tools should be stored in a dry locked-up place, out of reach of children.
6. Do not force the tool
It will do the job better and safer at the rate for which it was intended.
7. Use the right tool
- Do not force small tools to do the job of a heavy duty tool.
- Do not use tool for purposes not intended or for unsuitable purposes
- Ensure that the dimensions of the disks correspond to those indicated on the characteristics.
- Only use the machine for the purposes described in the instruction manual
8. Dress properly – Wear proper working clothing!
- Do not wear loose clothing or jewellery; they can be caught in moving parts.
- Rubber gloves and non-skid footwear are recommended when working outdoors.
- Wear protective hair covering to contain long hair.
9. Use protective equipment
To protect your health during grinding job:
- Use safety glasses or goggles
- Use face or dust protection mask if working operations create dust.
The noise level in the working area is above 85 dB(A). Therefore, wear ear protection (to avoid hearing
loss hazard)
10. Connect dust extraction equipment
if the tool is provided for the connection of dust extraction and collecting equipment, ensure these are
connected and properly used.
11. Do not abuse the power cord
- Do not use the cable for any purpose it has not been designated for.
- Do not use the cable for carrying or hanging of the machine.
- Do not use the cable to pull out the plug from the socket.
- Never yank the cord to disconnect it from the socket.
- Protect the cable from excessive temperatures, oil, and sharp edges.
- Protect the power cable from any damage the cable may be damaged by oil or acid

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

310056

Table des Matières