Parts List; Safety Instructions - Ribimex PRPMV1/M Manuel D'instructions Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN – Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
II. CHARACTERISTICS See Table 1
III. SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
WARNING!
To reduce the risk of injury, read the instruction manual and understand the
machine before use.
WARNING!
When using electric tools basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury.
Save all warnings and instructions for future reference.
Keep this manual handy so that you may refer to it later whenever any questions arise. Always be
sure to include this manual when selling, lending, or otherwise transferring the ownership of this
product.
Symbols (Explanation of symbols appearing on the tool, if applicable)
III. Safety instructions
IV. Getting Started
See Fig. 1
Caution! Risk of injury and/or damage and/or deterioration of product in case
of non-compliance to safety requirements
CE Conformity
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further
information for its safe disposal.
Class II product with double insulation
Wear protective equipment: ear protection, goggles and face mask.
Wear protective gloves and boots.
Keep all your body parts away from moving parts.
Keep persons (esp. children) and animals away from product and working
area.
WARNING! Electric hazard.
Disconnect from power source before cleaning, maintenance or any
intervention on the product.
Disconnect product from its power source before maintenance, cleaning or any
intervention on product; or when you do not use product.
Disconnect product from its main power source, if product, power cable, or
extension cord is damaged or cut during operation.
Unplug product by pulling the plug. Do not pull the cable.
V. Operation
VI. Maintenance and Storage
Page 9 / 21

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

531029

Table des Matières