Parts List; Safety Instructions - Ribimex PRACCC01 Manuel D'instructions Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

EN – Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
II. CHARACTERISTICS See Table 1
III. SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in serious injury.
WARNING!
To reduce the risk of injury, read the instruction manual and understand the
machine before use.
WARNING!
When using electric tools basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury.
Save all warnings and instructions for future reference.
Keep this manual handy so that you may refer to it later whenever any questions arise. Always be
sure to include this manual when selling, lending, or otherwise transferring the ownership of this
product.
Symbols (Explanation of symbols appearing on the tool, if applicable)
3.1- General safety warnings
• Understand the product. Read and follow the instructions in this manual.
• Do not disassemble or modify the product.
• Do not use this product if it is not completely assembled or if any parts appear to be missing
or damaged.
• Maintain good housekeeping and sufficient lighting in the working area.
• Keep children and bystanders away while operating this product.
• Cleaning and user maintenance shall not be made by children.
• Use attachments/accessories specified by the manufacturer.
• Perform service maintenance by qualified personnel only.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
3.2- Additional safety rules for pneumatic tools
• Never use oxygen, combustible or compressed gas cylinder as an air source.
• Always shut off air supply, drain hose of air pressure and disconnect tool from air supply
when not in use, before changing accessories or when making repairs.
III. Safety instructions
IV. Getting Started
See Fig. 1
Caution! Risk of injury and/or damage and/or deterioration of product in case
of non-compliance to safety requirements
CE Conformity
Wear personal protective equipment, including hearing protection, eye
protection, face mask.
Wear suitable protective gloves to protect hands from hazards including
crushing, impacts, cuts, abrasions and heat.
V. Operation
VI. Maintenance and Storage
Page 7 / 16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

280066

Table des Matières