Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN –
Original instructions
I. Presentation
II. Characteristics
I. PRESENTATION
1.1. Intended Use:
The sharpener is intended for sharpening use of chains of chainsaws.
1.2. Not Intended Use:
Do not use for grinding or cutting wood, plastic or non-ferrous metals with normal disks.
Do not use the flat side of the disk for grinding or sharpening.
Do not use sharpener for abrasive cutting.
1.3. Residual Risks
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors.
1.4. Parts List
1. Handle
2. Lateral protective guard
3. Grinding depth setting screw
4. Bearing arm angle setting wheel
5. Base
6. Grinding angle setting wheel
7. Scale
8. Mounting Screw
9. Rotary table
10. Chain guide
11. Screw
12. Chain stopper setting screw
13. Grinding disk
14. Disk protective enclosure
15. Motor
16. Screw
17. Chain stop
18. Holes for desk installation
19. Holes for wall installation
III. Safety instructions
IV. Getting Started
V. Operation
VI. Maintenance and Storage
Fig.1
Publicité
Table des Matières
