Powering Up The Systems - Belkin OmniView PRO3 Manuel De L'utilisateur

Installation

Powering Up the Systems

Verify that all servers connected to the PRO3 KVM Switch are powered on. If
any connected servers have not been powered on, it is okay to do so at this time
(servers can be powered on simultaneously). The PRO3 KVM Switch emulates
both a mouse and keyboard on each port and allows your server to
|boot normally.
The server connected to Port "1" will be displayed on the monitor. Check that the
keyboard, monitor, and mouse are working normally. Check all occupied ports to
verify that all servers are connected and responding correctly. If you encounter
an error, check your cable connections for that server and reboot. If the problem
persists, please refer to the "Troubleshooting" section in this User Manual.
1
2
3
4
5
6
7
8
25 25