Installation
Connecting the Console to the PRO3 KVM Switch
You must use the same type of platform for both the keyboard and mouse. For
example, if you are using a USB Keyboard, you must also connect a USB mouse
to the console.
Step 1
Connect the VGA monitor cable to the HDDB15 female port on the back of the
PRO3 KVM Switch in the "Console" section. (Refer to diagram below.)
Step 2
Connect the PS/2 or USB keyboard cable to the keyboard port on the back of
the PRO3 KVM Switch in the "Console" section. (Refer to diagram below.)
14