Replacing Spare Parts - MSA F2 X-TREM Manuel D'utilisation

Replacing Spare Parts

4 Replacing Spare Parts
Chin Strap
(a)
Ratchet Headband
Suspension
GB
Reinforcement plate (Only for EN16471/EN16473 version)
6
(c)
(b)
Front
(1) (2)
Rear
(1)
(2)
(1) Carefully remove the ratchet headband
by undoing the front and rear snaps from
their slots.
(1) Remove the straps by releasing them from
their fastening points.
(2) Fit the suspension system into the four slots,
the shortest straps go into the slots in the
(3)
front.
(3) During re-assembly, fit the strap behind the
bracket.
Use a Torx 20 to remove the 2 screws.
Remove the reinforcement plate.
F2 X-TREM
(1) Remove the rear clamp (c).
(2) Remove the front points (a)
and (b).
(3) Release top strap.