Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CONTENTS
Product Dimensions and Clearances ........................ 3-4
Optional Accessories ..................................................... 4
Ductwork, Framing ...................................................... 5
Power Supply ................................................................ 5
Duct Fittings................................................................... 6
Tools and Materials Required........................................ 7
Remove the Packaging ................................................. 7
Check Installation Hardware.......................................... 8
Ductwork, Wiring Locations ........................................... 8
PRODUCT DIMENSIONS AND CLEARANCES
36" Vent Hood Installation Combinations
This Stainless Steel Hood can be installed over any
Monogram cooktop, including the Professional 36"
rangetop and 30" or 36" range.
25"
*The supplied duct cover fits 8 ft. to 10 ft. ceilings.
The vent hood must be installed 24" min. and 30" max.
above the cooking surface. The hood installation height,
from the cooking surface to the bottom of the hood,
depends upon ceiling height.
Height Depending
on Ceiling Height
1" = 2.5 cm; 1' = 0.3 m
31-14900 Rev. 2
Design Information
*Height
to Ceiling
10"
35-5/8"
Installation
36" Min.
Step 1, Install Framing for Hood Support ...................... 9
Step 2, Install Mounting Brackets .................................. 9
Step 3, Install Duct Bracket ........................................... 9
Step 4, Install the Hood ............................................... 10
Step 5, Connect Ductwork ........................................... 10
Step 6, Connect Electrical ........................................... 11
Step 7, Install Duct Covers .......................................... 11
Step 8, Install Filters .................................................... 11
Step 9, Finalize Installation.......................................... 11
Cooking surface to bottom of hood should be:
• 25-1/2" max. for 8 ft. ceiling height.
• 25-1/2" to 30" for 9 ft. ceiling height.
• 30" min. for 10 ft. ceiling height.
Plan the installation height carefully to avoid unsightly
gaps above the hood.
This hood must be installed 30" min. above a Monogram
Professional Cooktop or Range. Ceiling height for this
installation combination must be at least 8'5" high.
NOTE: The supplied 2-piece duct cover is adjustable to
fit 8 ft. to 10 ft. ceilings. For ceiling heights greater than
10 ft. and up to 14 ft., order ZX14SDSS stainless steel
duct cover accessory.
ZV950SDSS Duct
Cover Dimensions
ZX14SDSS Duct Cover
Dimensions
3
Publicité
Chapitres
Table des Matières
