Pentair A5300 Mode D'emploi page 14

CHARGER/CONTROLLER LED DISPLAY
When the System Alert light IS NOT flashing, refer to Figure 6.

When the System Alert light IS flashing, refer to Figure 7 .

CONTROL BUTTON: RESULT OF PUSHING BUTTON:
System Test Pump starts and all LEDs light up.
Will reset the pump Activity LED.
When pushed with the Silence Alarm button, the Charger/Controller microprocessor resets and error code resets.
Silence Alarm Toggle; Prevents the audible alarm sounding. Press and release to reset.
Light Toggles the light on the Charger/Controller on and off.
Press and release Test System and Silence Alarm to reset system.
System Reset
14
FIGURE 7: ERROR CODE DISPLAYS (LEDS FLASHING)
TABLE II: CONTROL BUTTON FUNCTIONS
SIM979 (06-08-20)