Operating - ESAB KHM 405 YS Manuel D'instructions

M

Operating

KHM 405 YS 32
After having prepared the machine (charged the battery,
put in oil and fuel) the machine is ready for operation.
Before starting the engine please note the following:
• The welder should only be operated by qualified
personnel with experience in working with engine driven
welders.
• Check the oil level daily. Fuel should be put in before
starting the engine.
• Before using the welder or the auxiliary power let the
engine warm up and before stopping the engine let it run
without load to cool down.
Refer to the following instructions regarding the function
of the various controls on the front panel.
Controls and Instruments