General Symbols; Safety Symbols; Warning Symbols - ESAB KHM 405 YS Manuel D'instructions

GENERAL SYMBOLS

STOP – Read with great attention
Read with attention
WRENCH - Use the correct tools for the type of
work being done

WARNING SYMBOLS

ATTENTION - If this advice is not followed people
or things can be hurt or damaged.
HIGH VOLTAGE - Do not touch – risk of injury or
death.
FIRE - Risk of fire.
HEAT - Hot surfaces.
EXPLOSIVE - Explosive material or danger of
explosion, in general.
NO WATER - Do not use water as it can cause
shortcircuits or other damage.
NO SMOKING - Cigarettes, matches or lighters
can start a fire or explosion.
ACIDS - Danger of corrosion or burns.
SYMBOLS KHM

SAFETY SYMBOLS

Use the correct protective devices for the type of welding
being done
Use protective clothing, etc. specifically
designed for the type of welding being done.
Protect yourself when doing maintenance on the machine
-
It is advisable to protect yourself when carrying
out maintenance, such as filling the battery,
refuelling, etc.
Pay attention to safety precautions when moving the
machine
Refer to the instructions before moving the
machine
Wear indicated safety clothing -
It is compulsory to wear the personal
protection items shown when using the
equipment.
Use required safety devices -
Safety devices suitable for the type of welding
and the location of the job must be used.
Do not use water on electrical fires -
It is prohibited to use water to put our fires in
electrical equipment.
Do not touch without having disconnected the electricity -
It is prohibited to work on the machine until the
electricity has been turned off.
Welding prohibited -
It is forbidden to weld in areas containing
explosive gases.
M
2.1