Technical Specifications; Resetting The Module - Kärcher RDS1 Mode D'emploi

Operating voltage
GSM Standard
Line intake at rest
Line intake connection
Reset button Push once briefly
Press for at least 3 seconds
Briefly push three times in a row within 2 seconds
LED Colour
LAN 10/100 Green
LAN Link Green
POWER Green
COM Green
Orange
Signal Green
Status Green
Red
IN1 Green
IN2 Green
OUT1 Green
OUT2 Green
Flash frequency LED signal
900ms on, 100 ms off
200 ms on, 200 ms off
100 ms on, 900 ms off
Off
14

Technical specifications

Resetting the module

Meaning of the LED indications
Function
10/100 MBit/s 10MBit/s
Link
Power Supply
PPP link
PPP link
SIM card No signal or logged
VPN
Status
Input 1
Input 2
Output 1
Output 2
Indication of the field strength / reception strength
Value
20...31
13...19
0...12
99 (not identifiable)
Resets and restarts the software (soft reset)
Resets and restarts the hardware (hard reset)
Deletes all settings and resets the device to the factory settings.
Off Flashing
Missing
Offline
PPP data traffic
out
opened
opened
opened
opened
6
-
EN
VDC 24
900/1800
W 1
W 3
Blinking Permanent light
Data traffic
Field strength (see
table below)
VPN connection es-
Initialisation, firm-
Quality of the signal
Very good
Good
Poor
Insufficient
100 MBit/s
Connected
Available
Bodywork
Established
tablished
ware update
closed
closed
closed
closed