Remote operations of the washing
unit
To enable the system, send a SMS with the
content
AT**out2=pulse02
to query the meter readings. The RDS1
sends a SMS response with the content:
Sample station:
UNIT OPEN
The washing is enabled until the switch-off
command is given by the control of the sys-
tem or a SMS.
To lock the system, send a SMS with the
content
AT**out2=pulse03
to query the meter readings. The RDS1
sends a SMS response with the content:
Sample station:
UNIT CLOSED
Set to penalty day
The meaning of the penalty day can be
looked up in the operating instructions of
the washing bay.
To switch on, send an SMS with the content
AT**out2=pulse04
to query the meter readings. The RDS1
sends a SMS response with the content:
Sample station:
XXX% SMS FAST
Sample station:
Set collective message
XXX:
Set basic frequency in % for penalty day
From 0:00 a.m. of the following day, the
penalty setting will be taken over by the
control of the washing bay again.
Set to bonus day
The meaning of the bonus day can be
looked up in the operating instructions of
the washing bay.
To switch on, send an SMS with the content
AT**out2=pulse05
to query the meter readings. The RDS1
sends a SMS response with the content:
Sample station:
XXX% SMS SLOW
Sample station:
Set collective message
XXX:
Set basic frequency in % for bonus day
From 0:00 a.m. of the following day, the bo-
nus setting will be taken over by the control
of the washing bay again.
Function test
The function of the RDS1 module can be
tested by simulating an error.
Trigger a malfunction on the system
(e.g. operate a motor circuit breaker).
Approx. 60 seconds after the operation,
the RDS1 module generates an error
SMS.
You can hear the switching of the alarm
output on the modem.
The error message is shown on the mo-
bile phone.
Note:
If several recipients are listed for the error
messages, inform them prior to the test.
Warranty
The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of your accessory within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication. In the event of a warran-
ty claim please contact your dealer or the
nearest authorized Customer Service cent-
er. Please submit the proof of purchase.
Transport
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Storage
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
5
-
EN
13