Switching The Language Using The Programme Cd-Rom - Clarion NAX943DV Mode D'emploi

ClarionNavi_English.book 37 ページ ２００４年３月１９日 金曜日 午後４時１８分

Switching the language using the programme CD-ROM

WARNING:
• Changing system settings or setting a
destination should be done only when
the vehicle is not moving, or it should
be done by your passenger.
• Never play this programme CD-ROM on
any ordinary audio CD player.
The high volume could injure your ears
or damage the speakers.
CAUTION:
You need this programme CD-ROM to
change the combination of the two lan-
guages you use.
Be sure to retain the programme CD-ROM
after using it.
Tips:
When a new version of the map or a map
covering other districts is inserted, the guid-
ance to the stored locations ("Address Book"
and "Previous Dest.") may differ from that of
the previous map.
It is recommended that you store the loca-
tions in "Address Book" again.
Before loading
•
Park your vehicle in a safe location, apply
the parking brake, and then proceed with
the operation.
•
Turn on the ignition switch to start the
engine.
Loading
1
Press the EJECT button to remove the
map DVD-ROM.
2
Insert the programme CD-ROM gently
with the label side facing up.
3
Use the joystick to designate the combi-
nation of the languages you will use, and
then press the
Recognising overall structure / Switching the language using the programme CD-ROM
Tips:
If you are going to use English only and
select [1 English], you can select mile or km
on the screen when changing the distance
unit.
4
Select [OK], and then press the
button.
NOTE
Do not turn off the power during loading.
Do not remove the disc during loading.
During loading, the picture will disappear
from the monitor screen for a short time,
but this is not a malfunction.
button.
E-37